MSI P4N SLI XE
CPU
• Supports Socket 775 for Intel® P4 5XX, 6XX, P4EE, *Pentium D 8XX and Celeron D processors.
• Supports FSB 1066/800/533MHz.
• Supports EIST technology.
• Supports Intel® Hyper-Threading technology.
• *For Pentium D support info please refer to MSI CPU support table.
Please refer to CPU Support for compatible CPU; the above description is for reference only.
Chipset
• NVIDIA® nForce4 SLI Intel Edition North Bridge Chipset
- HyperTransport link to nVidia nForce 430 south bridge
- Supports 2 PCI Express x 16 and 1 PCI Express x 1 interface
- Supports dual channel, DDR2 533/667
• NVIDIA® nForce 430 Chipset
- HyperTransport link to NVIDIA nForce4 SLI X north bridge
- Integrate SATA-II controller, four drives
- Dual Fast-ATA 133 IDE controller, for four devices
- IEEE 802.3 nVIDIA MAC for 1000BASE-T
Main Memory
• Supports dual channel DDR2 533/667, using four 240-pin/1.8V DDR2 DIMMs.
• Supports a maximum memory size up to 16GB.
MSI Reminds You...
• DDR2 667 down speed to DDR2 533 with double-sided module:
- Every nVidia C19 projects with 4-layer PCB design, will have limitation with memory timing and frequency.
Once there is double-sided DIMM module installed, DDR2 667 will drop to DDR2 533.
Please use single-sided DIMM module with DDR2 667 configuration.
• Once there is FSB533 CPU installed, DDR2 memory frequency will limit on 533MHz to keep synchronous processing.
Slots
• Two PCI Express x16 slot (supports PCI Express Bus specification v1.0a compliant)
Normal mode
Primary PCI-E slot is compatible with PCI Express x 16
Secondary PCI-E slot is compatible with PCI Express x 1
SLI mode
Primary PCI-E slot is compatible with PCI Express x 8
Secondary PCI-E slot is compatible with PCI Express x 8
• Two PCI Express x1 slots (support PCI Express Bus specification v1.0a compliant)
• Two 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface)
On-Board IDE
• An IDE controller on the NVIDIA® nForce 430 (for nForce4 SLI Intel Edition) chipset provides IDE
HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.
- Can connect up to 4 IDE devices.
- Supports RAID 0, 1, 0+1, RAID 5 or JBOD mode.
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
On-Board SATA
• nForce 430 (for nForce4 SLI Intel Edition) supports 4 SATA II ports.
- Transfer rate is up to 3Gb/s.
- Supports RAID 0, 1, 0+1, RAID 5 or JBOD mode.
NV RAID
• Supports up to 4 SATA and 4 ATA133 Hard drives.
- RAID 0, 1, 0+1, 5 or JBOD is supported.
- Supports up to 8 drives for RAID function.
Audio
• 7.1 channel audio codec RealTek ALC880.
- Compliance with Azalia Spec.
LAN
• Supports 10/100/1000 Fast Ethernet by Marvell 88E1115.
USB
• 8 USB ports
- Controlled by nForce 430 (for nForce4 SLI Intel Edition) chip.
- 4 ports in the rear I/O, 4 ports via the external bracket.
IEEE1394
• VIA® 6306 chipset
- Supports up to three 1394 ports. (Rear panel x1, front x2)
- Transfer rate is up to 400Mbps.
Internal I/O Connectors
- ATX 24-Pin power connector
- 8-pin ATX 12V power connector
- 4-pin GPU power connector
- CPU / System / Power / NB FAN connectors
- 1 x IrDA infrared module header
- 1 x MSI D-Bracket 2 connector
- 1 x Serial port connector
- CD-in connector
- IrDA infrared module header
- Chassis intrusion switch connector
- Clear CMOS button
- Front panel audio connector
- Front panel connector
- 2 x IEEE1394 connector support additional 2 ports (optional)
- 2 x USB 2.0 connector support additional 4 ports
- 1 x Floppy disk drive connector
- 4 x serial ATA connectors
- 2 x ATA133 HD connectors
MSI Reminds You...
• All power connectors, ATX1 (24 Pin) & PWR1 (8 Pin, for CPU Power) & JPWR1 (4 pin, for PCI-E VGA) must be attached to this model to ensure operation of the Mainboard.
• A Power Supply of 450 watts, or above, is highly recommended for system stability.
• ATX 12V power connection should be 20A or greater.
• The floppy disk cable will be optional.
Back Panel I/O Ports
- 1 x Parallel port
- 1 x Serial port (COM 1)
- 1 x PS/2 Keyboard
- 1 x PS/2 Mouse
- 1 x Coaxial SPDIF out
- 1 x 6 in 1 Audio jack (S/SPDIF out)
- 1 x IEEE1394 port
- 4 x USB 2.0 ports
- 1 x RJ45 LAN Jacks
BIOS
• The mainboard BIOS provides ""Plug & Play"" BIOS which detects the peripheral devices and
expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface(DMI) function which records your
mainboard specifications.
Dimension
• 30.5cm(L) x 24.4cm(W) ATX Form Factor
Виж още Дънни платки за Intel процесори MSI
Виж всички Дънни платки за Intel процесори в категорията
CPU
• Supports Socket 775 for Intel® P4 5XX, 6XX, P4EE, *Pentium D 8XX and Celeron D processors.
• Supports FSB 1066/800/533MHz.
• Supports EIST technology.
• Supports Intel® Hyper-Threading technology.
• *For Pentium D support info please refer to MSI CPU support table.
Please refer to CPU Support for compatible CPU; the above description is for reference only.
Chipset
• NVIDIA® nForce4 SLI Intel Edition North Bridge Chipset
- HyperTransport link to nVidia nForce 430 south bridge
- Supports 2 PCI Express x 16 and 1 PCI Express x 1 interface
- Supports dual channel, DDR2 533/667
• NVIDIA® nForce 430 Chipset
- HyperTransport link to NVIDIA nForce4 SLI X north bridge
- Integrate SATA-II controller, four drives
- Dual Fast-ATA 133 IDE controller, for four devices
- IEEE 802.3 nVIDIA MAC for 1000BASE-T
Main Memory
• Supports dual channel DDR2 533/667, using four 240-pin/1.8V DDR2 DIMMs.
• Supports a maximum memory size up to 16GB.
MSI Reminds You...
• DDR2 667 down speed to DDR2 533 with double-sided module:
- Every nVidia C19 projects with 4-layer PCB design, will have limitation with memory timing and frequency.
Once there is double-sided DIMM module installed, DDR2 667 will drop to DDR2 533.
Please use single-sided DIMM module with DDR2 667 configuration.
• Once there is FSB533 CPU installed, DDR2 memory frequency will limit on 533MHz to keep synchronous processing.
Slots
• Two PCI Express x16 slot (supports PCI Express Bus specification v1.0a compliant)
Normal mode
Primary PCI-E slot is compatible with PCI Express x 16
Secondary PCI-E slot is compatible with PCI Express x 1
SLI mode
Primary PCI-E slot is compatible with PCI Express x 8
Secondary PCI-E slot is compatible with PCI Express x 8
• Two PCI Express x1 slots (support PCI Express Bus specification v1.0a compliant)
• Two 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface)
On-Board IDE
• An IDE controller on the NVIDIA® nForce 430 (for nForce4 SLI Intel Edition) chipset provides IDE
HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.
- Can connect up to 4 IDE devices.
- Supports RAID 0, 1, 0+1, RAID 5 or JBOD mode.
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
On-Board SATA
• nForce 430 (for nForce4 SLI Intel Edition) supports 4 SATA II ports.
- Transfer rate is up to 3Gb/s.
- Supports RAID 0, 1, 0+1, RAID 5 or JBOD mode.
NV RAID
• Supports up to 4 SATA and 4 ATA133 Hard drives.
- RAID 0, 1, 0+1, 5 or JBOD is supported.
- Supports up to 8 drives for RAID function.
Audio
• 7.1 channel audio codec RealTek ALC880.
- Compliance with Azalia Spec.
LAN
• Supports 10/100/1000 Fast Ethernet by Marvell 88E1115.
USB
• 8 USB ports
- Controlled by nForce 430 (for nForce4 SLI Intel Edition) chip.
- 4 ports in the rear I/O, 4 ports via the external bracket.
IEEE1394
• VIA® 6306 chipset
- Supports up to three 1394 ports. (Rear panel x1, front x2)
- Transfer rate is up to 400Mbps.
Internal I/O Connectors
- ATX 24-Pin power connector
- 8-pin ATX 12V power connector
- 4-pin GPU power connector
- CPU / System / Power / NB FAN connectors
- 1 x IrDA infrared module header
- 1 x MSI D-Bracket 2 connector
- 1 x Serial port connector
- CD-in connector
- IrDA infrared module header
- Chassis intrusion switch connector
- Clear CMOS button
- Front panel audio connector
- Front panel connector
- 2 x IEEE1394 connector support additional 2 ports (optional)
- 2 x USB 2.0 connector support additional 4 ports
- 1 x Floppy disk drive connector
- 4 x serial ATA connectors
- 2 x ATA133 HD connectors
MSI Reminds You...
• All power connectors, ATX1 (24 Pin) & PWR1 (8 Pin, for CPU Power) & JPWR1 (4 pin, for PCI-E VGA) must be attached to this model to ensure operation of the Mainboard.
• A Power Supply of 450 watts, or above, is highly recommended for system stability.
• ATX 12V power connection should be 20A or greater.
• The floppy disk cable will be optional.
Back Panel I/O Ports
- 1 x Parallel port
- 1 x Serial port (COM 1)
- 1 x PS/2 Keyboard
- 1 x PS/2 Mouse
- 1 x Coaxial SPDIF out
- 1 x 6 in 1 Audio jack (S/SPDIF out)
- 1 x IEEE1394 port
- 4 x USB 2.0 ports
- 1 x RJ45 LAN Jacks
BIOS
• The mainboard BIOS provides ""Plug & Play"" BIOS which detects the peripheral devices and
expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface(DMI) function which records your
mainboard specifications.
Dimension
• 30.5cm(L) x 24.4cm(W) ATX Form Factor
Виж още Дънни платки за Intel процесори MSI
Виж всички Дънни платки за Intel процесори в категорията
Технически характеристики
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
- 5
0 ревюта
- 4
0 ревюта
- 3
0 ревюта
- 2
0 ревюта
- 1
0 ревюта
Свързани продукти
Дънна платка ASROCK J3355M, Intel® Dual-Core Processor J3355, DDR3/DDR3L, PCI-Е (HDMI&DVI&VGA), 2 x SATA3 6.0 Gb/s, 2 x USB 3.1 Gen 1, 2 x USB 2.0, Micro ATX
96.03лв
Дънна платка MSI Pro H510M-B, H470, LGA1200, DDR4, PCI-E 3.0 (HDMI&VGA), 1x M.2, 4x SATA 6Gb/s, 2x USB 3.2 Gen1 Type A, Micro ATX
114.08лв
Дънна платка Asus PRIME H510M-K R2.0, H470, LGA1200, DDR4, 1xPCIe 4.0, 1xPCIe 3.0 x1, 1xM.2 слот, 4xSATA 6Gb/s слота, 4xUSB 3.2 Gen 1, 2xUSB 2.0, Micro ATX
114.28лв