FastTrak® TX2300
2-Port SATA RAID Adapter
Disk Array Features
Device Support - 2 Serial ATA ports for up to 2 Serial ATA 3G devices
Supported RAID Levels:
RAID 0/1/JBOD
RAID 0 – Data striped across 2 drives for increased performance
RAID 1 – Mirrored pairs of drives for data protection
Data Transfer Rate - Up to 266 MB per second (Performance may vary depending upon drive make, motherboard and PCI bus speed)
RAID Features:
Data handling optimizations include elevator seek and load balancing
Supports hot-swap of failed drives
Offers transparent data recovery and rebuilds drive in background
Variable stripe size
Online Capacity Expansion - add capacity on the fly
RAID Level Migration - change array levels on the fly
MetaData on Disk (MDD) for drive roaming
Easy to Use:
Quick initialization
Arrays are bootable with built-in BIOS
Upgrades your current disk drive to a RAID array by migrating
existing data to the array
System Management
Management Tools
PAM (Promise Array Management) local and remote monitoring for Windows — monitors status of arrays, hard drives, and controller via TCP/IP; warns of drive failure; allows rebuilds of mirrored arrays; synchronizes data in fault-tolerant arrays; email notification for array events; S.M.A.R.T.-compatible status reporting
Notification - Email, audible, and visible alarms
Operating System Support - Microsoft Windows XP, Windows 2003 Server, Windows 2000 RedHat Linux; SuSE Linux Linux partial open source code
Hardware
Serial ATA 3G Support:
Supports Serial ATA II: 3Gbps Specification
Supports Serial ATA II: Extensions to Serial ATA 1.0a, including
–Native Command Queuing
–Staggered Drive Spin-Up
–HDD Activity Indication
Supports serial ATA Spec 1.0a
Supports Serial ATA tagged command queuing (TCQ)
PCI Support - 32-bit / 66MHz PCI interface compliant to PCI Rev 2.3 (Backward-compatible with PCI 33)
HBA Features:
Low-profile form factor (HW) 2.25 x 4.69 inches (57 x 119 mm)
Flash upgradable for future updates
Supports ACPI (S1, S3, S4)
Physical and Environmental:
Operating temperature: 32 to 122°F (0 to 50°C)
Relative humidity: 5%-95% non-condensing
Up to 2 controllers in the same system are supported
Cables in kit - 2 x 25"" (650mm) Serial ATA Cables
Agency Certifications - UL, cUL, CE, FCC Class B, BSMI, MIC, C-Tick, VCCI
http://www.promise.com/media_bank/Download%20Bank/Datasheet/FT_TX2300_DS091406.pdf
Виж още Контролери Promise
Виж всички Контролери в категорията
2-Port SATA RAID Adapter
Disk Array Features
Device Support - 2 Serial ATA ports for up to 2 Serial ATA 3G devices
Supported RAID Levels:
RAID 0/1/JBOD
RAID 0 – Data striped across 2 drives for increased performance
RAID 1 – Mirrored pairs of drives for data protection
Data Transfer Rate - Up to 266 MB per second (Performance may vary depending upon drive make, motherboard and PCI bus speed)
RAID Features:
Data handling optimizations include elevator seek and load balancing
Supports hot-swap of failed drives
Offers transparent data recovery and rebuilds drive in background
Variable stripe size
Online Capacity Expansion - add capacity on the fly
RAID Level Migration - change array levels on the fly
MetaData on Disk (MDD) for drive roaming
Easy to Use:
Quick initialization
Arrays are bootable with built-in BIOS
Upgrades your current disk drive to a RAID array by migrating
existing data to the array
System Management
Management Tools
PAM (Promise Array Management) local and remote monitoring for Windows — monitors status of arrays, hard drives, and controller via TCP/IP; warns of drive failure; allows rebuilds of mirrored arrays; synchronizes data in fault-tolerant arrays; email notification for array events; S.M.A.R.T.-compatible status reporting
Notification - Email, audible, and visible alarms
Operating System Support - Microsoft Windows XP, Windows 2003 Server, Windows 2000 RedHat Linux; SuSE Linux Linux partial open source code
Hardware
Serial ATA 3G Support:
Supports Serial ATA II: 3Gbps Specification
Supports Serial ATA II: Extensions to Serial ATA 1.0a, including
–Native Command Queuing
–Staggered Drive Spin-Up
–HDD Activity Indication
Supports serial ATA Spec 1.0a
Supports Serial ATA tagged command queuing (TCQ)
PCI Support - 32-bit / 66MHz PCI interface compliant to PCI Rev 2.3 (Backward-compatible with PCI 33)
HBA Features:
Low-profile form factor (HW) 2.25 x 4.69 inches (57 x 119 mm)
Flash upgradable for future updates
Supports ACPI (S1, S3, S4)
Physical and Environmental:
Operating temperature: 32 to 122°F (0 to 50°C)
Relative humidity: 5%-95% non-condensing
Up to 2 controllers in the same system are supported
Cables in kit - 2 x 25"" (650mm) Serial ATA Cables
Agency Certifications - UL, cUL, CE, FCC Class B, BSMI, MIC, C-Tick, VCCI
http://www.promise.com/media_bank/Download%20Bank/Datasheet/FT_TX2300_DS091406.pdf
JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.
Виж още Контролери Promise
Виж всички Контролери в категорията
Технически характеристики
| Тип: | Контролер |
|---|---|
| От какъв интерфейс: | PCI |
| Към какъв интерфейс: | SATA2 |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
- 5
0 ревюта
- 4
0 ревюта
- 3
0 ревюта
- 2
0 ревюта
- 1
0 ревюта
