Кутия Kolink Balance, E-ATX/ATX/mATX/Mini-ITX, 1x USB 3.0, RGB подсветка, закалено стъкло, черна, без захранване

Kolink Balance


This feature-rich Midi-Tower case may have a stunning exterior, but behind this facade lies a lot of space for powerful gaming hardware. All this gaming goodness can be admired through the tempered glass side panel, and as it supports motherboards up to E-ATX in form factor, there will be plenty to look at. A thoughtfully included PSU shroud also helps users stash away unsightly cables. The front of the case, with its fine mesh and air vents, helps ensure not only good airflow, it also helps accentuate the digitally addressable RGB-LED strip and the look of the case as a whole. A switch on the I/O panel allows the lighting to be controlled. Alternatively, the strip can be connected directly to the motherboard and controlled that way instead. The overall ventilation of the case is also helped by the presence of a fine mesh with integrated dust filter on the top. A pre-installed 120 mm fan is also equipped with dARGB lighting.

The Features of the Kolink Balance Midi-Tower at a Glance:

- Stylish Midi-Tower for motherboards up to E-ATX format

- Tempered glass side panel for an unobstructed view of the interior

- Front with fine-mesh ventilation grille

- Attractive dARGB lighting on the front

- A pre-installed 120 mm fan with dARGB lighting at the rear

- Up to five 120 mm- and four 140 mm fans possible in total

- Space for graphics cards up to 370 mm, CPU coolers up to 162 mm

- I/O Panel with controller for RGB-LEDs, 1x USB 3.0 and 2x USB 2.0

Technical Details:

Dimensions (H x W x D):
425 x 210 x 470 mm

Material:
Steel, tempered glass, plastic

Weight:
approx. 6.2 kg

Colour:
black

Form factor:
E-ATX, ATX, Micro-ATX, Mini-ITX

Total possible fans:
2x 120/140 mm (cover)
3x 120 or 2x 140 mm (front)
1x 120 mm (back)

Pre-installed
1x 120 mm ARGB rear side

Radiator Mounts:
1x 360/280 mm (front)
1x 240/280 mm (cover)
1x 120 mm (back)

Filter:
cover, bottom, front

Drive bays:
2x 3.5/2.5 inch (internal, HDD cage)
2x 2.5 inch (internal, mainboard tray)

Power supply:
1x standard ATX (optional)

Expansion slots:
7

GPU Mounting orientation:
Vertical (dual slot, riser cable sold separately) or horizontal

I/O panel
1x USB 3.0 type A (internal connection)
2x USB 2.0 (internal connection)
1x audio in/out
1x RGB switch

Maximum graphics card length:
370 mm

Maximum CPU cooler height:
162 mm

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.

Виж още Компютърни кутии Kolink
Виж всички Компютърни кутии в категорията