Кутия Kolink Inspire X3 ARGB TG (GEKL-072A), ATX/mATX/Mini-ITX, 1x USB 3.0, прозорец, черна, без захранване

INSPIRE X3

From the popular Inspire series comes the next entry into the series - The X3 ARGB Midi-Tower. With an attractive front panel design featuring an angled ARGB strip, matte black finish and mesh ventilation, the Inspire X3 Midi-Tower is another excellent addition to the price/performance sector.

The Features of the Kolink Inspire X3 ARGB at a Glance

• Matte Black effect front panel with an angled ARGB strip & mesh ventilation
• Pre-installed rear 120mm fan with digitally addressable RGB lighting
• Option to sync to motherboard software provided as standard
• Tempered glass side panel for unobstructed view of the interior
• Designed for ATX/Micro-ATX-/Mini-ITX motherboards
• Support for radiators up to 240mm in the front & 120mm at the rear
• I/O Panel with 1x USB3.0 & 2x USB2.0, HD Audio & RGB button
• Graphics cards up to 300mm supported, CPU coolers up to 165mm, PSUs up to 160 mm

Kolink Inspire X3: ARGB ready

The Kolink Inspire X3 features an angled front ARGB strip, along with a rear 120mm ARGB fan, controlled by the I/O panel RGB button or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. The front panel also features both a matte black effect finish, alongside air inlets for good airflow. Users are also free to install up to a 240mm radiator in the front and a 120mm at the rear.

Aside from the pre-installed fans, users are also free to install three 120mm or two 140mm fans on the front panel, plus two 120mm fans in the roof. A full tempered glass side panel shows off your system build in style.   

The Kolink Inspire X3: Hardware capable

The interior comes entirely in black, with space for HDDs or SSDs on the bottom of the chassis in the provided enclosure. The motherboard tray offers numerous openings for cable management. Underneath the case is a removable dust filter suitable for an ATX PSU up to 160mm.

Graphics cards can be up to 30cm long and CPU coolers up to 16.5cm tall. Additionally, the I/O panel located at the front possesses two USB2.0 ports as well as a USB3.0 Type-A port.

Technical details:

Dimensions: 200 x 430 x 350mm (W x H x D)

Box Dimensions: 250 x 475 x 402mm (W x H x D)

Material: Steel, tempered glass, plastic

Weight: approx. 4.5kg

Colour: Black

Form factor: ATX, Micro-ATX, Mini-ITX

Total fans possible:

• 3x 120mm / 2x 140mm (Front)
• 2x 120mm (Roof)
• 1x 120mm (Rear)

Pre-installed:

• 1x 120mm (Rear) ARGB

Radiator Mountings:

• 1x 240mm (Front)
• 1x 120mm (Rear)

Filter: Bottom

Drive bays:

• 2x 3.5/2.5" (internal)
• 1x 2.5" (internal)

PSU: 1x Standard ATX (optional)

Expansion slots: 7

I/O-Panel:

• 2x USB2.0 (internal connection)
• 1x USB3.0 (internal connection)
• 1x Audio In/Out
• RGB/Reset Switch

Max GPU length: 300mm

Max CPU cooler height: 165mm

Max PSU length: 160mm

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.