Key features
-High grade LLS bearing with class leading 100,000 hours MTBF
-Equipped with a counter-pull magnet that reduces the axial tension on the bearing
-Fan geometry optimized for a good balance between static pressure and maximum airflow, resulting in good performance in all usage scenarios
-Aerodynamically shaped stator struts including the wire strut. Helps reduce noise and unwanted turbulence
-Stator struts sit on a wide angle to the trailing edge of the blades which result in a lower noise level and smoother noise profile
-Strategically placed notches near the fan hub on the trailing edge of the blades further reducing the humming noise produced when the blades pass the stator struts
-A "trip wire" on the rear side of the blades near the leading edge. The trip wire introduces a larger turbulent boundary layer at an earlier stage, this delays the layer separation and improves both airflow and noise characteristics.
-The customized design of the Dynamic Series fans contributes to a beautiful, cool build
Specifications
Fan
X2 GP-12
Size [mm]
120*120*25mm
Screw hole pattern
105*105mm
Connector
3-pin fan header
Bearing
LLS
Number of blades
7
Rotational speed [RPM]
1200
Acoustical noise [dB (A)]
19.4
Maximum air flow [CFM]
52.3
Maximum pressure [mm H2O]
0.88
Actual input power [W]
1.32
Maximum rated input current [A]
0.18
Nominal input voltage [V]
12
Minimum startup voltage [V]
4
MTBF [hours]
100,000
Unit weight [g]
119
Package weight [g]
160
Cable length [mm]
500
Cable type
Black ribbon cable
Packaging dimensions [mm]
( Including hanging tab)
180*122*26
Packaging dimensions [mm]
(Excluding hanging tab )
147*122*26
Виж още Вентилатори Fractal Design
Виж всички Вентилатори в категорията
-High grade LLS bearing with class leading 100,000 hours MTBF
-Equipped with a counter-pull magnet that reduces the axial tension on the bearing
-Fan geometry optimized for a good balance between static pressure and maximum airflow, resulting in good performance in all usage scenarios
-Aerodynamically shaped stator struts including the wire strut. Helps reduce noise and unwanted turbulence
-Stator struts sit on a wide angle to the trailing edge of the blades which result in a lower noise level and smoother noise profile
-Strategically placed notches near the fan hub on the trailing edge of the blades further reducing the humming noise produced when the blades pass the stator struts
-A "trip wire" on the rear side of the blades near the leading edge. The trip wire introduces a larger turbulent boundary layer at an earlier stage, this delays the layer separation and improves both airflow and noise characteristics.
-The customized design of the Dynamic Series fans contributes to a beautiful, cool build
Specifications
Fan
X2 GP-12
Size [mm]
120*120*25mm
Screw hole pattern
105*105mm
Connector
3-pin fan header
Bearing
LLS
Number of blades
7
Rotational speed [RPM]
1200
Acoustical noise [dB (A)]
19.4
Maximum air flow [CFM]
52.3
Maximum pressure [mm H2O]
0.88
Actual input power [W]
1.32
Maximum rated input current [A]
0.18
Nominal input voltage [V]
12
Minimum startup voltage [V]
4
MTBF [hours]
100,000
Unit weight [g]
119
Package weight [g]
160
Cable length [mm]
500
Cable type
Black ribbon cable
Packaging dimensions [mm]
( Including hanging tab)
180*122*26
Packaging dimensions [mm]
(Excluding hanging tab )
147*122*26
Виж още Вентилатори Fractal Design
Виж всички Вентилатори в категорията
Технически характеристики
Размер: | 120 мм |
---|
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
0.00 от 0 ревюта
- 5
- 4
- 3
- 2
- 1