Toughpower XT 875W
- Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.91 standards.
- 24/7 @ 50 C: Guaranteed to deliver 875W continuous power.
- Double-forward switching circuitry: compared with traditional circuitry, double-forward switching circuitry offers low power loss and high reliability.
- Unparalleled DC to DC converters for 3.3V and 5V outputs to reach high efficiency.
- High quality Japanese capacitors: ensure superb performance and reliability.
- 105 ° C solid state capacitors: great stability at higher operating temperatures, frequencies and currents.
- 80 PLUS Bronze certified – provide up to 89% effective power conversion to cut-down electric cost.
- S.P.T. Indicator: PSU status monitor with 3-mode LED ( standby / PG signal / temperature).
- Fan Delay Cool Technology: allows 14cm fan to continue to operate 15-30 sec after system shuts- down to ensure all components are properly cooled.
- 12Vin1: single +12V rail design providing up to 72A.
- Multi-GPU ready: 2 x PCI-E 6+2pin & 2 x PCI-E 6pin for PCI-Express graphic cards.
- Active Power Factor Correction (PFC) with PF value of 0.95 at full load.
- Auto switching circuitry for universal AC input from 90-264V.
- High reliability: MTBF>120,000 hours.
- Dimension: 150mm(W) x 86mm(H) x 160mm(L)
- Built-in industry grade protections : Over Current, Over Power, Over Voltage, Under Voltage, and Short- Circuit protection.
- Safety / EMI Approvals: UL/CUL, FCC, TUV, CE, BSMI, and GOST certified.
Type Intel ATX 12V 2.3 & EPS 12V 2.91
Max. Output Capacity 875W
Peak Output Capacity 975W
Color Black
Dimension ( W / H / D ) 150mm(W) x 86mm(H) x 160mm(L)
PFC (Power Factor Correction) Active PFC
Power Good Signal 100-500 msec
Hold Up Time 15msec (minimum) at 80% of full load at 230Vac input.
Input current 115Vac / 12A max. 230Vac / 6A max.
Input Frequency Range 47 Hz ~ 63 Hz
Input Voltage 100 VAC- 240 VAC
Operation Temperature 0 C to +50 C
Operating Humidity 20% to 90%,non-condensing
Storage Temperature -20 C to +70 C
Storage Humidity 5% to 95%, non-condensing
Cooling System 140mm dual ball bearing Fan:1900 RPM ± 10%
Efficiency 82% ~85% at full load (typical) and 115Vac input. Up to 89% at 230V Input.
MTBF 120,000 hrs minimum
Safety Approval UL/CUL, FCC, TUV, CE, BSMI, GOST
http://www.thermaltake.com/products-model.aspx?id=C_00001572
Виж още Захранвания Настолни компютри Thermaltake
Виж всички Захранвания Настолни компютри в категорията
- Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.91 standards.
- 24/7 @ 50 C: Guaranteed to deliver 875W continuous power.
- Double-forward switching circuitry: compared with traditional circuitry, double-forward switching circuitry offers low power loss and high reliability.
- Unparalleled DC to DC converters for 3.3V and 5V outputs to reach high efficiency.
- High quality Japanese capacitors: ensure superb performance and reliability.
- 105 ° C solid state capacitors: great stability at higher operating temperatures, frequencies and currents.
- 80 PLUS Bronze certified – provide up to 89% effective power conversion to cut-down electric cost.
- S.P.T. Indicator: PSU status monitor with 3-mode LED ( standby / PG signal / temperature).
- Fan Delay Cool Technology: allows 14cm fan to continue to operate 15-30 sec after system shuts- down to ensure all components are properly cooled.
- 12Vin1: single +12V rail design providing up to 72A.
- Multi-GPU ready: 2 x PCI-E 6+2pin & 2 x PCI-E 6pin for PCI-Express graphic cards.
- Active Power Factor Correction (PFC) with PF value of 0.95 at full load.
- Auto switching circuitry for universal AC input from 90-264V.
- High reliability: MTBF>120,000 hours.
- Dimension: 150mm(W) x 86mm(H) x 160mm(L)
- Built-in industry grade protections : Over Current, Over Power, Over Voltage, Under Voltage, and Short- Circuit protection.
- Safety / EMI Approvals: UL/CUL, FCC, TUV, CE, BSMI, and GOST certified.
Type Intel ATX 12V 2.3 & EPS 12V 2.91
Max. Output Capacity 875W
Peak Output Capacity 975W
Color Black
Dimension ( W / H / D ) 150mm(W) x 86mm(H) x 160mm(L)
PFC (Power Factor Correction) Active PFC
Power Good Signal 100-500 msec
Hold Up Time 15msec (minimum) at 80% of full load at 230Vac input.
Input current 115Vac / 12A max. 230Vac / 6A max.
Input Frequency Range 47 Hz ~ 63 Hz
Input Voltage 100 VAC- 240 VAC
Operation Temperature 0 C to +50 C
Operating Humidity 20% to 90%,non-condensing
Storage Temperature -20 C to +70 C
Storage Humidity 5% to 95%, non-condensing
Cooling System 140mm dual ball bearing Fan:1900 RPM ± 10%
Efficiency 82% ~85% at full load (typical) and 115Vac input. Up to 89% at 230V Input.
MTBF 120,000 hrs minimum
Safety Approval UL/CUL, FCC, TUV, CE, BSMI, GOST
http://www.thermaltake.com/products-model.aspx?id=C_00001572
JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.
Виж още Захранвания Настолни компютри Thermaltake
Виж всички Захранвания Настолни компютри в категорията
Технически характеристики
Изходна мощност: | 875 W |
---|
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
- 5
- 4
- 3
- 2
- 1
Свързани продукти