Грамофон Pro-Ject Audio Systems 6perspeX Balanced, Pick it MC3 доза, ремъчно задвижване, 33/45 оборота в минута, прозрачен

Pro-Ject Audio Systems 6perspeX Balanced

Crystal clear sound & look

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

 

9 CC EVO Tonearm

The 6PerspeX Balanced turntable features our high end 9“ CC carbon tonearm with a massive bearing construction. It uses an inverted cardanic ABEC 7 quality bearing with 4 stainless steel tips. This bearing type is very stable and low friction, which guarantees a clear tracking. The full aluminium tonearm base offer you real audiophile features. It allows you to adjust both the azimuth and the vertical tracking angle (VTA). Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridge.

 

True Balanced

The included Pro-Ject MC3 cartridge allows you a „True Balanced“ signal transmission. The Pick it MC3 is an all-purpose cartridge which delivers powerful and dynamic sound optimised for pop and rock, but also for big orchestral classic. The big advantage of a balanced connection is its ability to remove picked up noise and interferences. Our „True Balanced“ cable range offers you the perfect cable to connect your turntable to the Phono Box S3 B, Phono Box DS3 B or our Tube Box DS3 B.

 

Features

• NEW „True Balanced Connection“ by Pro-Ject
• NEW RCA phono & 5-pin mini XLR output
• NEW pre-adjusted Pick it MC3 cartridge
• Sub-chassis made from Corian with magnetic suspension
• Acoustically inert sandwich MDF platter
• Vinyl layer on platter for perfect record surface
• Inverted main bearing with ceramic ball/plate
• Belt drive with AC motor with DC driven AC generator
• Electronic speed control with 33/45 rpm switching
• Pre-mounted EVO 9 CC tonearm
• Tonearm bearings with ABEC 7 ballraces
• Connect it Phono E RCA cable
• Handmade in Europe

 

Technical Specifications

Speed:	33, 45 (electronic speed change)
Drive principle:	belt drive
Platter:	MDF/vinyl Sandwich (300mm diameter)
Mains bearing:	inverted stainless steel + ceramic ball
Wow & flutter:	+/-0,1%
Speed drift:	+/-0,06%
Signal to noise:	73dB
Tonearm:	EVO 9 CC
Effective arm length:	230 mm
Effective arm mass:	8,0 g
Overhang:	18mm
Tracking force:	10 - 35mN
Supplied counterweights:	5 - 14gr
External power supply:	15 volts DC / 800mA
Power connection:	110/120 or 230/240 Volt - 50 or 60 Hz
Power consumption:	6 watts max / < 0,3 watts standby
Dimensions:	460 x 183 x 365mm (WxHxD)

Виж още Аудио системи Pro-Ject Audio Systems
Виж всички Аудио системи в категорията