The Linksys PAP2-NA Phone Adapter enables high-quality feature-rich telephone service through your cable or DSL Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone jacks to connect your existing phones or fax machines. Each phone jack operates independently, with separate phone service and phone numbers -- like having two phone lines. With an appropriate Internet telephone service provider, you'll get clear telephone reception and reliable fax connections, even while using the Internet at the same time for normal data operations.
PAP2-NA Package Contents:
Phone Adapter
Power Adapter
User Guide on CD-ROM
Network Cable
Quick Installation
PAP2-NA Telephony Features
The PAP2 has two voice ports (RJ-11) for analog phones or fax machines with two independent telephone numbers
The PAP2 has one RJ-45 port for 10Base-T Ethernet connection
The PAP2 supports Dynamic Host Configuration Protocol (DHCP)
The PAP2 supports Session Initiation Protocol (SIP)
The PAP2 supports multiple voice compression G.711, G.726, G.729, and G.723.1
Web-based configuration through a built-in web server
Telephone key pad configuration via voice prompts
Supports DTMF tone detection and generation
Supports FSK Caller ID, DTMF Caller ID and FSK VMWI
Support echo cancellation and Voice Activity Detection (VAD)
Password protected access and configuration
Supports auto-provisioning with remote firmware upgrade
PAP2-NA Specifications:
Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports One 10/100 RJ-45 Network Port, Two Standard Phone Ports, One Power Port
Cabling Type RJ-45 Ethernet Category 5, RJ-11 Standard Phone Cable
LEDs Power, Ethernet, Phone1, Phone2
Voice Protocol Session Initiation Protocol (SIP v2)
Voice Codecs G.711 a-law, G.711μ-law, G.726, G.729 A, G.723.1
Ringer Equivalence Number (REN) 5 REN per RJ-11 port
Ring Frequency 10 Hz - 40 Hz
FXS Port Impedance Eight Configurable Setting Including North America 600 ohms, European CTR21
Ring Voltage 60 - 90 Vrms Configurable
Security Features Password-Protected Administration
PAP2-NA Environmental Specifications:
Dimensions: 101 mm x 101 mm x 15 mm
Power Input: 5V DC 2.0A
Certifications: FCC, cUL, CE
Виж още VoIP Телефонен адаптер Linksys
Виж всички VoIP Телефонен адаптер в категорията
PAP2-NA Package Contents:
Phone Adapter
Power Adapter
User Guide on CD-ROM
Network Cable
Quick Installation
PAP2-NA Telephony Features
The PAP2 has two voice ports (RJ-11) for analog phones or fax machines with two independent telephone numbers
The PAP2 has one RJ-45 port for 10Base-T Ethernet connection
The PAP2 supports Dynamic Host Configuration Protocol (DHCP)
The PAP2 supports Session Initiation Protocol (SIP)
The PAP2 supports multiple voice compression G.711, G.726, G.729, and G.723.1
Web-based configuration through a built-in web server
Telephone key pad configuration via voice prompts
Supports DTMF tone detection and generation
Supports FSK Caller ID, DTMF Caller ID and FSK VMWI
Support echo cancellation and Voice Activity Detection (VAD)
Password protected access and configuration
Supports auto-provisioning with remote firmware upgrade
PAP2-NA Specifications:
Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports One 10/100 RJ-45 Network Port, Two Standard Phone Ports, One Power Port
Cabling Type RJ-45 Ethernet Category 5, RJ-11 Standard Phone Cable
LEDs Power, Ethernet, Phone1, Phone2
Voice Protocol Session Initiation Protocol (SIP v2)
Voice Codecs G.711 a-law, G.711μ-law, G.726, G.729 A, G.723.1
Ringer Equivalence Number (REN) 5 REN per RJ-11 port
Ring Frequency 10 Hz - 40 Hz
FXS Port Impedance Eight Configurable Setting Including North America 600 ohms, European CTR21
Ring Voltage 60 - 90 Vrms Configurable
Security Features Password-Protected Administration
PAP2-NA Environmental Specifications:
Dimensions: 101 mm x 101 mm x 15 mm
Power Input: 5V DC 2.0A
Certifications: FCC, cUL, CE
Виж още VoIP Телефонен адаптер Linksys
Виж всички VoIP Телефонен адаптер в категорията
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
- 5
- 4
- 3
- 2
- 1