Водно охлаждане за процесор Lian Li GALAHAD 360 SL White, съвместимост със сокети Intel LGA 115X/LGA 1366/LGA 775/LGA 1200/LGA 2011, LGA 2066 & AMD AM4

REMOVABLE MAGNETIC ALUMINIUM CAP

Switching between two different looks to match the interior configuration.

CUSTOMIZABLE ADDRESSABLE RGB LIGHTING

Connect LED and FAN cables to Uni hub and use L- Connect to control.

Only select the 1st LED Mode for water block to operate smooth lighting effects.

The all-new GALAHAD series

features a state-of-the-art triple-chamber pump design which combines the pump chamber, the connecting chamber, and the cold plate chamber into one unit to significantly reduce the friction produced by the coolant’s rapid flow.

This design also serves as a protection mechaism to prevent your system from leaks should the CPU block pump be damaged.

TRIPLE-CHAMBER STRUCTURE

The all-new GALAHAD series features a state-of-the-art triple-chamber pump design which combines the pump chamber, the connecting chamber, and the cold plate chamber into one unit to significantly reduce the friction

produced by the coolant’s rapid flow. This design also serves as a protection mechaism to prevent your system from leaks should the CPU block pump be damaged.

MULTI-CHAMBER TECHNOLOGY (M.C.T)

The M.C.T. design separates the hot and cool liquid flow by conveying them into different, sealed water passages, significantly enhancing the heat exchange efficiency and extending the lifespan of the CPU block pump by preventing the hot liquid from flowing back.

HIGH-DENSITY ALUMINIUM RADIATOR

The radiator encompasses 14 rows of aluminium tubes, allowing a maximum amount of liquid to pass through and transfer the heat out of the system efficiently.

And thanks to the high-density fin folds between the aluminium tubes, the surface area providing heat dissipation is significantly increased.

MORE DURABLE, EXTREMELY SILENT

A close look at what makes UNI FAN operate efficiently.

ROTATABLE BLOCK HOUSING

The CPU block can be rotated to ensure a properly aligned logo no matter what the orientation of the block is.

Press M to adjust the LED indicator and further control the lighting
effect’s speed or brightness.

If the LED indicator is green, press + or – to adjust lighting effects.
If the LED indicator is red, press + or – to adjust speed. 
If the LED indicator is blue, press + or – to adjust brightness.
If the LED indicator is yellow, the lighting effect is on auto-mode,
thus + and – are non-functional.