Main Profile- Framework- Top/Bottom Cases:
Multi Folded Automated Bending technology applied corner profile
system, provides a heavy duty structure results to high load capacity
of: 100 kgs on wall.
Monoblock multi folded welded top and bottom cases 11 times
bended resulted to a very sturdy/strong construction, tighty fixed to
the framework with fixing hardware.
Top case has a ready Forced Ventilation (Fan Module) integration
area. This area is with pre-punched slots even without Fan
integration provides passive heat removal function via convection.
Top case integrated with a cable entry point with rubber edged
sliding mechanism with w:145mmxd:70mm allows proper cabling
insertion. The rubber edged mechanism works between 0 to 50mm
slide out.
After inserting the cables, the rubber edged mechanism holds and
fixes the cables in parallel preventing the cabinet from dust entry.
Access to enclosure- and Door / Panel Construction;
Front door is integrated with decorative 1,2mm thickness metal
frames, full length smoked, shatterproof, antistatic, 4,0mm thickness
glass with single point locking barrel lock.
There is Decorative Colored Trims charming the attraction of
customers. With blue, green, red, grey, dark grey, or any other color
requirement is applicable on these Trims.
Front door openning direction is set right to left, but reversible to left
to right at site with removing the hinge system. Hinge System is
spring loaded easy operating version, which allows you to remove
the whole front door from cabinet in seconds.
Side Panels are lockable and removable with barrel style lock,
Multifolded bending technology with 4 fold bending provides the
rigidity. Easy mechanical locking of panel to main frame with snap
capture sytem allows easy attachment of panels and easy removal in
seconds while installation in process.
Rear Panels are mechanically screwed to main module, which is
Multifolded bending technology with 5 fold bending provided the
rigidity. Rear Panel can be used for wall fixing and drilling pattern.
Bottom case and Rear Panel integrated with PVC gland plates.
Once needed gland plate on bottom and rubber edged sliding
mechanism on top could be replacing each other on site
Виж още Мрежови шкафове Lande
Виж всички Мрежови шкафове в категорията
Multi Folded Automated Bending technology applied corner profile
system, provides a heavy duty structure results to high load capacity
of: 100 kgs on wall.
Monoblock multi folded welded top and bottom cases 11 times
bended resulted to a very sturdy/strong construction, tighty fixed to
the framework with fixing hardware.
Top case has a ready Forced Ventilation (Fan Module) integration
area. This area is with pre-punched slots even without Fan
integration provides passive heat removal function via convection.
Top case integrated with a cable entry point with rubber edged
sliding mechanism with w:145mmxd:70mm allows proper cabling
insertion. The rubber edged mechanism works between 0 to 50mm
slide out.
After inserting the cables, the rubber edged mechanism holds and
fixes the cables in parallel preventing the cabinet from dust entry.
Access to enclosure- and Door / Panel Construction;
Front door is integrated with decorative 1,2mm thickness metal
frames, full length smoked, shatterproof, antistatic, 4,0mm thickness
glass with single point locking barrel lock.
There is Decorative Colored Trims charming the attraction of
customers. With blue, green, red, grey, dark grey, or any other color
requirement is applicable on these Trims.
Front door openning direction is set right to left, but reversible to left
to right at site with removing the hinge system. Hinge System is
spring loaded easy operating version, which allows you to remove
the whole front door from cabinet in seconds.
Side Panels are lockable and removable with barrel style lock,
Multifolded bending technology with 4 fold bending provides the
rigidity. Easy mechanical locking of panel to main frame with snap
capture sytem allows easy attachment of panels and easy removal in
seconds while installation in process.
Rear Panels are mechanically screwed to main module, which is
Multifolded bending technology with 5 fold bending provided the
rigidity. Rear Panel can be used for wall fixing and drilling pattern.
Bottom case and Rear Panel integrated with PVC gland plates.
Once needed gland plate on bottom and rubber edged sliding
mechanism on top could be replacing each other on site
Виж още Мрежови шкафове Lande
Виж всички Мрежови шкафове в категорията
Технически характеристики
Височина: | 12U Unit |
---|---|
Дълбочина: | 600 mm |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
0.00 от 0 ревюта
- 5
- 4
- 3
- 2
- 1
Свързани продукти
-
Комуникационен шкаф SOHO MR.SOH06U30MN.025, 10", 6U, 306 x 300 x 305, свободностоящ, товароносимост 80кг, сив
103.27лв
-
Комуникационен шкаф Mirsan MR.SOH07U30DE.01, 7U, 535 x 300 x 350 mm, D=300 мм, черен
118.57лв
-
Комуникационен шкаф Mirsan MR.SOH07U30DE.02, 7U, 535 x 300 x 350 mm, D=300 мм, бял
121.96лв