Безжично зарядно устройство j5create JUPW1101W, oт контакт към безжично зарядно, 5V/1A/1.5A/9V/1.1A, 1000/2000/3000 mA, кафява/дърво, Qi технология, 10/7.5/5W

Безжично зарядно устройство J5CREATE JUPW1101W, кафява/дърво, 10W

Бързо зарядно с вградена индуктивна Qi™ технология за безжично зареждане 
Осигурява изход до 10W за стандартни Qi™ устройства/като Samsung Galaxy Note 8,S9,S8,S8 Plus,S7,S7 Edge,Note 5,S6 Edge,LG G6 и др./ и до 7,5W за стандартни Qi™ устройства, като iPhone® X/8/8 PLUS и нагоре 
Стандартното зареждане осигурява изход до 5W за стандартни Qi™ устройства 
Светодиоди показват състоянието на зарядното устройство 
Защита от пренапрежение, за безопасно зареждане 
Анти-плъзгащата се подложка за сигурно зареждане 
Елегантен, компактен и тънък дизайн 

Безжично зарядно - 10W 
Вход: 5V/2A, 9V/2A, 12V/1.5A 
Изход: 5V/1A – 1.5A or 9V/1.1A 

Зарядно - Quick Charge™ 3.0 
Вход: 100 – 240V, 50/60 Hz, 0.5A 
Изход: 5V/3A, 9V/2A, 12V/1.5A

Specifications

• Hardware
  10W Wireless Charger
  Input	5V/2A, 9V/2A, 12V/1.5A
  Output	5V/1A – 1.5A or 9V/1.1A
  Quick Charge ™ 3.0 Charger
  Input	100 – 240V, 50/60 Hz, 0.5A
  Output	5V/3A, 9V/2A, 12V/1.5A
  Indicator light identification
  Connected to a power outlet	Flashes blue, white 3 times and then white stays lit
  Charging	Fades from warm white to blue 5 times and then turns off
  When not charging properly due to foreign object detection	Flashes blue, then enters protection mode and stops charging until the foreign object is removed
  When not charging properly due to overheating	Flashes blue and white, then enters protection mode and stops charging until the temperature returns to a safe level
  Physical Specifications
  Weight	10W Wireless Charger:  Approximately 0.15 lbs / 69g  Quick Charge ™ 3.0 Charger:  Approximately 0.13 lbs / 58.5g
  Environmental
  Storage Temperature	-20 – 70°C
  Storage Humidity	5 – 95% RH. Non-condensing
  Operation Temperature	0 – 25°C
  Operation Humidity	< 35 – 95% RH. Non-condensing

  
  System Requirements

  • Compatible with all Qi ™ devices
  • For 10W and 7.5W fast charge, the Quick Charge ™ 3.0/2.0 charger (included) must be used
  • The fast charge only supports iPhone ® and select Android ™ devices. 

  
  Note:

  • Use only j5create approved chargers (5V/3A, 9V/2A, 2V/1.5A). Unauthorized chargers may cause damage or the wireless charger may malfunction.
  • To ensure the best charging performance, put the mobile device in the center of the 10W wireless charger. If the mobile device is not properly placed on the 10W wireless charger’s surface (depending on the location of the mobile device’s wireless charging coil), your mobile device may not charge properly.
  • Do not place foreign materials, such as metal objects, magnets or cards with a magnetic strip between the mobile device and the wireless charger. The mobile device may not charge properly or may become damaged due to overheating.
  • Wireless charging may not work properly if you have attached a thick case to your mobile device. If your case is thick, remove it before placing your mobile device on the wireless charger.