Грамофон Pro-Ject Audio Jukebox E1, Ortofon OM 5E доза, 2x 50W@4ohms, Bluetooth, Line in, Line out, Phono out, 33/45 об/мин, кафяв

Pro-Ject Audio Jukebox E1

Juke Box E1 is record player, phono stage, Bluetooth receiver, line preamplifier and power amplifier in one chassis, requiring only a pair of speakers and cables to complete the system. If you thought that a starter turntable system is complicated to set up, Juke Box E1 will show you otherwise. This great-sounding belt-drive deck comes with the Ortofon OM 5E cartridge mounted & aligned, the tracking force & anti-skate set. These are the trickiest parts of turntable setup & we’ve taken care of them for you. An acrylic dust cover is also included. Available in high-gloss black, red or white.

Just Add Speakers

With its range of analog and digital inputs, Juke Box E1 is one of the most versatile offerings on the market. A turntable, a preamplifier, a power amplifier and a BT receiver are at the ready for you. The line output even lets you relay the signal to a 2nd amplifier allowing playback through a headphone amp or a 2nd system entirely. The built-in high-contrast display shows you volume and the selected input. The 32-step digital potentiometer helps you achieve the desired volume. Pressing the volume knob also changes the input. For further convenience, an infrared remote control is included!

Sound Adjustments

With the supplied remote control you can not only switch inputs, power off/on and adjust the volume. You can also fine-tune as you listen. Press the ‘Loudness’ button to use a default preset or adjust the treble & bass to your liking.

• Reworked tonearm & headshell design
• Anti-resonant ABS polymer main platter
• Damped DC motor
• Electronic speed change
• Instant playback with super-easy setup
• Bluetooth, 1 line input, 1 line output
• High-contrast display
• Gold-plated sockets
• Pre-adjusted tracking force & anti-skating
• Pre-mounted Ortofon OM 5E cartridge
• Belt drive with silicone belt
• Special feet for effective decoupling

Specs

• Power output: 2 x 50W (4 ohms)
• Outputs: Speaker, line out (fixed), phono out
• Inputs: BT, 1x line (analog)
• Speed: 33, 45rpm (electronic speed change)
• Principle: belt drive
• Speed variance: 0.7% (33rpm), 0.6% (45rpm)
• Wow & flutter: 0.25% (33rpm), 0.23% (45rpm)
• Platter: 300mm anti-resonant ABS polymer
• Tonearm: 8.6″ aluminum
• Effective arm length: 218.5mm
• Overhang: 22.0mm
• Effective tonearm mass: 7.0g
• Included: power supply, dust cover, remote
• Power consumption: 110W max
• Dimensions (WxHxD): 16.34 x 4.65 x 13.15″