UPS EATON 9SX 1000i 9SX1000I, 1000VA/900W, Online, LCD дисплей, 1x USB, RS232, Tower

EATON 9SX 1000i (Tower)
9SX1000I

Overview
topology On-line double conversion with PFC system (power factor correction)
Configuration Tower
Commercial References 9SX1000I
Power (VA / Watts) 1000/900
Dimensions H x W x D, mm 252 x 160 x 387
Guarantee 2 years warranty

Entrance
Input connection
(1) IEC-320-C14
IEC C14
Range of tension 190-276V without derating (up to 120-276V with derating)
Nominal voltage 200/208/220/230 / 240V
Frequency 50/60 Hz autoselection
Frequency range 40-70 Hz

Exit
Output sockets
(6) IEC-320-C13
IEC C13
Output frequency 50/60 Hz autoselect, frequency converter as standard

Typical autonomy
With 1 EBM
With 2 EBMs
With 3 EBMs
With 4 EBMs
Charge (Watts)Battery life is approximate and may vary by equipment, battery age, temperature, etc. The range shown may vary by plus or minus 15% depending on the typical values.
Show: Typical Autonomy


With 1 EBM
With 2 EBMs
With 3 EBMs
With 4 EBMs

Charge (Watts): 667 Typical
Battery Life
: 9
With 1 EBM: 41
With 2 EBMs: 75
With 3 EBMs: 111
With 4 EBMs: 152
Battery management ABM® and temperature compensation method (selectable by the user), automatic battery test, deep discharge protection, automatic recognition of external battery units.
Extended battery possibility EBM

communications
User interface Multilingual graphic LCD screen
Standard communication ports 1 USB port + 1 RS232 serial port + 1 remote remote On / Off terminal block
Communication Locations 1 slot for Network-M2, Network-MS, ModBus-MS or Relay-MS cards

Environment and security
Audible noise <41dB
Operating temperature 0 to 40 ° C continuously
Security marking IEC / EN 62040-1, UL 1778, CSA 22.2
EMC IEC / EN 62040-2, FCC Class B, CISPR22 Class B
certifications CE / CB report (TUV) / cULus / EAC / RCM / BIS / KCC

Виж още UPS Eaton
Виж всички UPS в категорията