Access point/Аксес пойнт, D-Link DWL-8600AP Indoor Unified, с PoE, 300 Mbps, 802.11a/b/g/n, 10/100/1000BASE-T, 4 външни антени

Overview

The D-Link® DWL-8600AP is the next generation Unified Access Point supporting the IEEE 802.11n standard with Plenum-rated metal chassis. Versatile and powerful, this device can be flexibly deployed as a standalone wireless Access Point or as a managed Access Point (AP) manageable from a wireless controller or unified wireless switch. Businesses can start with an intelligent DWL-8600AP that provides many advanced Wireless LAN functions, then migrate to a centrally managed system anytime later by integrating the same DWL-8600AP with a D-Link unified wireless switch or controller.

Blazing Wireless Speeds

IEEE 802.11n offers up to six times increased throughput when compared with existing 802.11a/g networks. The DWL-8600AP is also fully backwards compatible with 802.11a/b/g clients. While operating at 802.11n it allows for a 2x2 configuration with two Tx and Rx streams for each radio. Multiple In Multiple Out (MIMO) and wider bandwidth channels increase physical transfer rates while using 802.11. MIMO allows for more information to be coherently resolved by using several antennas instead of a single antenna. By employing the DWL-8600AP today, you can prepare your business for the future generation of wireless devices and mobile applications.

Advanced Power Saving

The DWL-8600AP features scheduled and unscheduled Automatic Power Save Delivery (APSD). Unscheduled APSD (U-APSD) is a power management method that is more efficient than older 802.11 Power Save Polling. The primary benefit of U-APSD is that it allows for the voice client to synchronize the transmission and reception of voice frames with the AP, thereby allowing the client to go into power saving mode when not sending or receiving packets. The DWL-8600AP is fully compliant with 802.3af even when operating at maximum power.

Centrally Managed From Unified Wired/Wireless Switch

The DWL-8600AP can operate in conjunction with a D-Link unified wireless switch or controller. In this mode, multiple DWL-8600APs can connect directly or indirectly to a DWS-4026 to provide unparalleled security and wireless mobility for wireless clients. Each DWL-8600AP can be tuned by these switches to provide optimal Radio Frequency (RF) channels and transmission power for all mobile clients, giving them the best wireless signals in both 2.4GHz and 5.0GHz bands for uninterrupted connectivity.

When operating in conjunction with a Unified Wireless Switch or Controller, the switch automatically configures every reachable DWL-8600AP in it’s AP database so no configuration is necessary during installation. If a DWL-8600AP needs to be replaced, the replacement DWL-8600AP automatically inherits the same configuration, making the replacement process a simpler one.

Intelligent Standalone Access Point

The DWL-8600AP has everything on board that enables network administrators to set up a secure wireless network and to connect to any Ethernet-compliant switch and router. Advanced wireless functions that the DWL-8600AP supports include: WEP data encryption, WPA/WPA2 security, client MAC address filtering, AP load balancing, QoS/WMM (Wireless Multimedia), and Rogue AP Detection. Security configuration settings can be locally stored on the DWL-8600AP itself. Wireless connections can easily be expanded by adding more DWL-8600APs or other 802.11a/g/n compliant APs to the site. With AP Clustering, up to eight APs can form a cluster for convenient management and configuration of all APs. Businesses without complicated network requirements can use the DWL-8600AP to get a wireless network set up and running without the need for any additional special hardware.

Flexible Dual Band Wireless LAN Connectivity

The DWL-8600AP delivers concurrent wireless performance and maximum wireless signal rates in both frequency bands simultaneously. With dual band connectivity, two wireless networks are created both running at full bandwidth speeds, offering a significant increase in total network capacity. At the same time, the DWL-8600AP remains fully backward compatible with the 802.11b standard in the 2.4GHz frequency.

Optimal Wireless Performance

The architecture of most current wireless LAN controllers requires wireless traffic to return to the controller for centralized processing, providing unnecessary traffic delay. The DWL-8600AP, when operating with a D-Link Wireless Switch or Controller, offers administrators extra options. Depending on the wireless application, wireless traffic can either be tunneled back to the switch for better security control or locally forwarded at the Access Point for optimal performance. This device offers administrators maximized flexibility with options to tunnel guest traffic to the switch for centralized security control, and forward VoIP traffic delivery from the Access Point for optimal performance.

The DWL-8600AP furthermore supports AP Clustering and Wireless Distribution System (WDS). WDS allows for the AP to act as a wireless bridge, connecting two different networks to each other without the need for a cable.

Total Security & Quality of Service

The DWL-8600AP can continuously scan both frequency bands and their associated channels to detect rogues while simultaneously providing wireless connectivity to mobile clients. If a rogue is detected, it reports the result to the Unified wireless switch or controller that manages it. From a management console, administrators can identify the rogue AP and take appropriate action. The DWL-8600AP supports 64/128-bit WEP data encryption, WPA/WPA2 security and multiple SSID per RF band. Connected to the Unified wireless switch or controller, these functions along with wireless user MAC Address Filtering and SSID Broadcast Disable can be used to set up security and limit outsiders’ access to the internal network. The DWL-8600AP supports 802.1Q VLAN Tagging and WMM (Wi-Fi Multimedia) for important wireless transmissions such as VoIP and streaming media applications, delivering critical user-based services, such as prioritized delivery of voice traffic.

Technical Specifications

System

Standards
• IEEE 802.11a, 802.11b, 802.11g, 802.11n Wireless LAN
• IEEE 802.3, 802.3u Ethernet
• IEEE 802.11d Regulatory Domain Selection
• IEEE 802.11h
• IEEE 802.3x Flow Control
• IEEE 802.3af Power over Ethernet (PoE)

Antenna
• 4 single detachable omnidirectional antennas with reverse SMA connectors (two for each band)
• Antenna Gain: 6dBi for 5GHz frequency band, 4dBi for 2.4GHz frequency band

Ethernet Interface
• 10/100/1000BASE-T Port with 802.3af PoE

Configurable Operation Mode
• Access Point only
• Access Point with Wireless Distribution System
• Wireless Distribution System

Security
• 64/128-bit WEP Data Encryption
• MAC Address Filtering: Local or RADIUS database
• WPA/WPA2 EAP
• WPA/WPA2 PSK
• TKIP/AES
• 802.11i/WPA2: Supports pre-authentication and key caching for WPA2 Enterprise
• 802.1Q SSID broadcast enable/disable
• 16 SSID per frequency band, 32 SSID per AP
• RADIUS (RFC 2865, 3580): Supports authentication with RADIUS, up to 4 external RADIUS servers
• Isolated security for each SSID (Different security settings for each SSID)
• Station Isolation
• IEEE 802.1X Supplicant

Supported Management Methods/Protocol
• Uses protocols supported in DWS-4026 Unified Switch
• HTTP/HTTPS
• SSH
• SNMP
• Syslog
• Telnet

Physical & Environmental

Diagnostic LEDs
• Power
• LAN
• 2.4GHz
• 5.0GHz

External Power Adapter
• Input: 100-240VAC; 50/60Hz
• Output: 48VDC; 0.4A
• Power consumption: Max. 11W

Power over Ethernet
• 48VDC +/- 10%
• Power consumption: Max. 12W

Stand-Alone Mode
• WEP/WPA/WPA2 Security
• Rogue AP Detection
• WIDS
• Station Isolation
• MAC Address Filtering
• AP Load Balancing Setup
• WDS
• AP Clustering
• QoS/WMM
• Local Storage Configuration

Managed Mode (Managed by DWS-4026 switch)
• Centralized Management
• Centralized Firmware Dispatch
• Visualized AP Management Tool
• Auto-Power Adjustment
• Dynamic Auto-Channel Selection
• L2 Fast Roaming
• L3 Fast Roaming
• Captive Portal
• WEP/WPA/WPA2 Security
• Rogue AP Detection
• Rogue AP Mitigation
• Station Isolation
• MAC Address Filtering
• AP Load Balancing Setup
• QoS/WMM

Dimensions
• 7.5” x 7.83” x 1.45” (190.5 x 198.8 x 36.8mm)

Weight
• 2.25lbs (1.02kg)

Operating Temperature
• 32°F to 104°F (0° to 40°C)

Storage Temperature
• -4° to 149°F (-20° to 65°C)

Operating Humidity
• 10% to 90% non-condensing

Storage Humidity
• 5% to 95% non-condensing

Certifications
• FCC Class B
• VCCI
• TELEC
• Wi-Fi
• ICES-003
• EN60601-1-2
• NCC
• CSA International
• UL2043

MTBF
• 523,721 hours

Warranty
• Limited Lifetime

Ordering Information

• DWL-8600AP Unified Wireless 802.11n Access Point

Optional products

• DWS-4026 L2+ Unified Wired/Wireless Switch with 24 gigabit Ports and 2 10G modules
• DWC-1000 Unified Wireless Controller
• DWS-3160-24TC L2 Unified Wireless Switch with 24 gigabit Ports
• DWS-3160-24PC L2 Unified Wireless Switch with 24 PoE gigabit Ports


Скорост 300 Mbps
Антена 4 Dualband detachable omnidirectional antennas with reverse SMA connectors
Интерфейс 10/100/1000BASE-T
Стандарти 802.3, 802.3u, 802.3x, 802.3af, 802.11a, 802.11b, 802.11g, 802.11n, 802.11d, 802.11h
Сигурност 64/128/152-bit WEP, WPA/WPA2 EAP, WPA/WPA2 PSK, TKIP/AES, 802.1Q SSID, RADIUS (RFC 2865, 3580), IEEE 802.1X, MAC Address Access Control List
Захранване Through 48VDC, 0.4A external power adapter
Управление HTTP/HTTPS, SSH, SNMP, Syslog, Telnet



Виж още Аксеспойнт/Репитер Безжични D-Link
Виж всички Аксеспойнт/Репитер Безжични в категорията