UPS CyberPower OLS1000EA, 1000VA/900W, ON line, Tower

CyberPower OLS1000EA

CyberPower OLS1000EA is a high-performance UPS featuring online double-conversion topology, which provides seamless Pure Sine Wave power for mission-critical devices such as NAS and servers, DVRs/surveillance systems, transportation and infrastructure, and emergency systems. It’s typically integrated in the back office, server room, and data center environment.

The UPS is designed with color LCD panel for users to monitor power system and configure settings easily. This model is generator compatible and also adopts ECO mode to conserve power. The product can be connected to Emergency Power Off (EPO) switch, which allows users to shut off UPS immediately during emergency. The variable speed fans provide automatic thermal management based on power load to reduce noise and provide greater comfort for users.

Specifications:

General
Phase
Single Phase
Form Factor
Tower
UPS Topology
Online Double Conversion
Energy Saving Technology
Online ECO Mode Efficiency > 95%
Active PFC Compatibility
Yes
Input
Generator Compatibility
Yes
Nominal Input Voltage ( Vac )
230 ± 10%
Input Voltage Range ( Vac )
160 ~ 300
Adjustable Voltage Range ( Vac )
0~50% Load for 110 ~ 300 Vac
0~60% Load for 120 ~ 300 Vac
0~80% Load for 140 ~ 300 Vac
0~100% Load for 160 ~ 300 Vac
Input Frequency ( Hz )
50 ± 10
60 ± 10
Input Frequency Detection
Auto-sensing
Rated Input Current ( A )
4.5
Input Power Factor
0.98
Input Connector Type
IEC C14     
Detachable Power Cord Plug Type
Schuko x 1     
Power Cord Length (ft.)
5
Power Cord Length (m.)
1.5
Output
Capacity (VA)
1000
Capacity (Watts)
900
On Battery Waveform
Pure Sine Wave
On Battery Voltage(s) ( Vac )
208 ± 1%
220 ± 1%
230 ± 1%
240 ± 1%
Output Voltage Setting
Configurable
On Battery Frequency ( Hz )
50 ± 0.5%
60 ± 0.5%
Output Frequency Setting
Configurable
Power Factor
0.9
ECO Mode Voltage Tolerance
± 15 %
Overload Protection
Internal Current Limiting, Circuit Breaker, Fuse
Overload Protection (Line Mode)
110~120% Load for 1 min, >120% Load Immediately
Overload Protection (Battery Mode)
110~120% Load for 10 sec, >120% Load Immediately
Overload Protection (Bypass Mode)
>130% Load Immediately
Crest Factor
3 : 1
Harmonic Distortion (Linear Load)
THD＜3%
Harmonic Distortion (Non-linear Load)
THD＜5%
Internal Bypass
Automatic Bypass, Manual Bypass
Outlet(s) - Total
3
Outlet Type
Schuko x 2     
IEC C13 x 1     
Outlet(s) - Battery & Surge Protected
3
Typical Transfer Time ( ms )
0
Battery
Runtime at Half Load ( min )
11
Runtime at Full Load ( min )
4
Typical Recharge Time ( Hours )
4
Maximum Charging Current ( A )
1.5
Start On Battery
Yes
Smart Battery Management (SBM)
Yes
Battery Type
Sealed Lead-acid
Compatible Extended Battery Module (EBM)
BPSE24V40A
Max. EBM Quantity ( pcs )
3
Surge Protection & Filtering
Surge Suppression ( Joules )
345
EMI/RFI Filtration
Yes
Management & Communications
LCD Panel
Yes
LCD Types
Color LCD
LCD Information Display
Operation Type, Power Status, Battery Status, Load Status, Fault & Warning, Other Information, Event & Log
LCD Setting & Control
Mode Setting, Alarm Setting, Input & Output, Battery Setting
HID Compliant USB Port(s)
1
Emergency Power Off (EPO) Port
Yes
Audible Alarms
Battery Mode, Low Battery, Overload, Overcharge, Overheat, UPS Fault, Replace Battery
Management Cable ( pcs )
USB Cable x1
Power Management Software
PowerPanel Business (Recommended)
SNMP/HTTP Remote Monitoring
Yes - with optional RMCARD205
Physical
Enclosure Construction
Metal
Color
Black
Physical Size - UPS Module
Dimensions (WxHxD) (in.)
5.5 x 7.5 x 12.9
Dimensions (WxHxD) (mm.)
140 x 191 x 327
Weight (lbs.)
20.6
Weight (kg.)
9.4