Comex Cover CORE 6K
- True On-Line Double Conversion Technology (EN 62040-3) provides perfect output voltage parameters, regardless of the input voltage and the load.
- Automatic Bypass (Static Switch) provides continuous load supply in critical conditions, such as overheating or inverter failure.
- Frequency converter feature lets you set the output frequency to 50Hz or 60Hz.
- USB, RS-232, Dry Contact for UPS (Uninterruptible Power Supply) and load supervision and control.
- TVSS surge suppressors and built-in RJ-45 connectors guarantee safety of data send through network.
- Ethernet Interface for computer-network communication with SNMP protocol support
- Software controlled output receptacles enable managing groups of load.
- Small dimensions – all power units have 2U only what makes installation and operation easy and compact.
- High efficiency reduces heat dissipation and decreases operating costs.
- ECO-Mode gives possibility of significant cost reduction and in practice stops heat emission. Efficiency up to 99%.
- Backup time extension possibility provides exact fitting for required autonomy time.
- Automatic diagnostics ensure that components and parameters are controlled without user interference.
- High input power factor reduces the value of current drawn from the mains.
- High output power factor (PF=1 for 6-10kVA) allows load of versatile characteristics to be connected.
- Wide input voltage range for normal mode ensures that the batteries are used only if necessary - in fact, only when the input voltage is completely lost.
- Wide input frequency range for normal mode gives possibility for seamless operation with different power sources - as mains or the generating set.
- Automatic start up ensures maintenance-free operation even after the unit was switched-off after long time mains failure.
- Advanced Battery Management gives reliability of optimal charging and using batteries, elongates its lifetime and reduces operation costs.
- Battery start up feature enables unit start up without mains supply.
- Excellent voltage quality is provided by IGBT inverter and high-frequency PWM modulation method; the output voltage has always stable parameters, independent of input disturbances and load characteristics.
- High overload capacity indicates power reliability during transient conditions and high resistance on handling faults.
- Advanced power management software provides full control of UPS.
- User configurable settings – nominal voltages, frequencies, preferred operating modes, ways of communication – widens the range of possible applications.
- REPO – enables remote emergency power off, in case of emergency
- Extra charger inbuilds in 6 and 10kVA models
- Possibility to parallel units 6 and 10kVA for capacity or redundancy.
+ Internal batteries 20 x 9 Ah (Battery module)
Tech specs:
Power | 6000 VA 6000 W |
No. of phases IN : OUT | 1:1 |
Input | |
Nominal voltage | 208 / 220 / 230 / 240 Vac |
Voltage range | -30% ÷ +30% @ 100% ≥ load > 80% -40% ÷ +30% @ 80% ≥ load > 70% -48% ÷ +30% @ 70% ≥ load > 60% -52% ÷ +30% @ 70% ≥ load > 0% |
Frequency | 50 / 60 Hz |
Frequency range | -20% ÷ +20% |
THDi | <3% |
Input power factor | ≥0,99 |
Output | |
Nominal voltage | 208 / 220 / 230 / 240 Vac |
Output power factor | 1,0 |
Voltage regulation static/dynamic | ±1% / ±3% |
Frequency | 50 / 60 ±0,05 Hz |
Overload capacity inverter | 110% - 10min, 130% - 1 min., > 130% - 1 sek. |
Efficiency on-line mode | >95% |
Efficiency eco Mode | 99% |
Controlled socet groups | Yes |
Creast factor | 3:1 |
Batteries | |
Amount of internal batteries | - |
Cold start | Yes |
Connector for external batteries | Yes |
Charging time | 4 hours up to 90% capacity |
Weight and dimensions | |
Weight and dimensions of UPS (W x D x H) [mm] | 438 x 665 x 88 (2U) |
17,0 kg | |
Weight and dimensions of battery module (W x D x H) [mm] | 438 x 630 x 133 (3U) |
63,0 kg | |
Communications | |
Working indicator | LCD panel + sound alarm |
Communications | Standard: RS232, USB, TVSS, SNMP Slot, REPO |
Enviromental | |
Noise level | <50 dB |
Operating temperature for UPS | 0°C ÷ 45°C |
Recommended operating temperature for UPS | 15°C ÷ 25°C |
Storage Temperature | -25°C ÷ 55°C |
Humidity | 0 ÷ 95% (without condensing) |
Standards | |
Standards | EN 62040-2:2005, EN 62040-2:2006 |
Safety | IEC62040-1-1, CE, 62040-3 :2001 |
Виж още UPS Comex
Виж всички UPS в категорията
Технически характеристики
Изходяща мощност: | 6000 VA |
---|---|
Тип: | ON Line |
Формфактор: | Rack/Tower |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
- 5
- 4
- 3
- 2
- 1
Вземи на изплащане
Свързани продукти