Точка за достъп Cisco WAP351-E-K9, Dual Radio 802.11n (2.4 GHz & 5 GHz), 300 Mbps, 5 Port PoE Switch (EU), вътрешни антени

Cisco WAP351-E-K9

Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (ETSI)

Improved Coverage, Easy to Deploy, Secure Business-Class Wireless-N Connectivity

Highlights
● Provides cost-effective 802.11n connectivity for 2.4-GHz and 5-GHz clients
● 5-Port Gigabit Ethernet Switch for connecting multiple devices with PD/PSE support
● PD port allows access point to be powered by backbone switch
● Captive portal enables highly secure guest access with customized roles and rights
● Single point setup requires no controller for easy, cost-effective deployment of multiple access points
● Works right out of the box with easy installation and simple web-based configuration and wizard
Product Overview
As your employees become more mobile and collaborative, they need dependable, business-class access to network applications throughout the office. Extend secure, high-performance mobile networking to them and guests simply and cost-effectively with the Cisco® WAP351 Wireless-N Dual Radio Access Point. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.

The Cisco WAP351 Wireless-N Dual Radio Access Point uses concurrent dual-band radios for improved coverage and user capacity. The 5-port Gigabit Ethernet switch allows more devices to be connected to the access point (AP) and allows the AP to be powered by the backbone switch, also helping reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth-sensitive traffic for voice-over-IP (VoIP) and video applications.

To provide secure guest access to visitors and other users, the Cisco WAP351 Wireless-N Dual Radio Access Point supports a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. A customized guest login page lets you present a welcome message and access details, and reinforces your brand with company logos.

Cisco WAP351 Wireless-N Dual Radio Access Points are easy to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. An attractive design with flexible mounting options enables the access points to smoothly blend into any small business environment.

To enhance reliability and safeguard sensitive business information, the Cisco WAP351 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1 X RADIUS authentications help keep unauthorized users out.

Designed to scale smoothly as your organization grows, the access points feature controllerless Single Point Setup that simplifies the deployment of multiple access points without additional hardware. With the Cisco WAP351 Wireless-N Dual Radio Access Point, you can extend business-class wireless networking to employees and guests anywhere in the office, with the flexibility to meet new business needs for years to come.

Standards
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type Category 5e or better
Antennas Internal antennas optimized for installation on a wall or ceiling
LED indicators Power, WLAN, LAN
Operating system Linux

Physical Interfaces
Ports 5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power
Power Supply 802.3af/at PoE and External 48V/1.25A DC power adapter (not included)
Buttons Reset button, Power On/Off
Lock slot
Slot for Kensington lock
Physical dimensions (W x D x H)
9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)
Weight 1.34 lb or 0.607 kg

Network Capabilities
VLAN support Yes
Number of VLANs 1 management VLAN plus 16 VLANs for SSIDs
802.1X supplicant Yes
SSID-to-VLAN mapping Yes
Auto channel selection Yes
Spanning Tree Yes
Load balancing Yes
IPv6 Yes
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2
802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN

Security
WPA/WPA2 Yes, including Enterprise authentication
Access control Yes, management access control list (ACL) plus MAC ACL
Secure management
HTTPS
SSID broadcast Yes
Rogue-access-point detection Yes
Mounting and Physical Security
Multiple mounting options
Mounting bracket included for easy ceiling or wall mounting
Physical security lock
Kensington lock slot
Quality of Service
Quality of service (QoS)
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Performance
Wireless throughput Up to 300-Mbps data rate (real-world throughput will vary)
Recommended user support 32 active clients/users per radio
Multiple-Access Point Management
Single Point Setup Yes
Number of access points per cluster 8
Active clients per cluster 240

Configuration
Web user interface- Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management
Management protocols
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management Yes
Event logging Local, remote syslog, email alerts
Network diagnostics
Logging and packet capture
Web firmware upgrade
Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)
DHCP client
IPv6 host Yes
HTTP redirect Yes

Wireless
Frequency
Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type
Dual radio, orthogonal frequency division multiplexing (OFDM)

WLAN 802.11n
2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz
2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz
20, and 40 MHz for 802.11n
PHY data rate up to 600 Mbps
Data rates supported 802.11a/b/g:
● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n: 6.5 to 300 Mbps
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates

Internal antennas
Internal Fixed PiFA Antenna
Antenna gain in dBi
Maximum antenna gain of 5.3 dBi on 2.4 GHz
Maximum antenna gain of 5.1 dBi on 5 GHz
Wireless distribution system (WDS)
Yes
Roaming
802.11i only
Multiple SSIDs
16
Wireless VLAN map
Yes
WLAN security
Yes
Wi-Fi Multimedia (WMM)
Yes, with unscheduled automatic power save

Operating Modes
Access point
Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental
Power options
IEEE 802.3af/af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC Adapter - SB-PWR-48V-xx (not included)
PoE power:
Peak PoE power: 18W

Compliance
Safety:
● UL 60950-1
● CAN/CSA-C22.2 No. 60950-1
● IEC 60950-1
● EN 60950-1
Radio approvals:
● FCC Part 15.247, 15.407
● RSS-210 (Canada)
● EN 300.328, EN 301.893 (Europe)
● AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
● FCC Part 15.107 and 15.109
● ICES-003 (Canada)
● EN 301.489-1 and -17 (Europe)
Operating temperature
0° to 40°C (32° to 104°F)
Storage temperature
-20° to 70°C (-4° to 158°F)
Operating humidity
10% to 85% noncondensing
Storage humidity
5% to 90% noncondensing
System memory
128-MB RAM
128-MB Flash

http://www.cisco.com/c/en/us/products/collateral/wireless/small-business-300-series-wireless-access-points/datasheet-c78-733625.html



Виж още Аксеспойнт/Репитер Безжични Cisco
Виж всички Аксеспойнт/Репитер Безжични в категорията