Access point/Аксес пойнт, Cisco Aironet 2600 (AIR-CAP2602E-E-K9), 450 Mbps, 802.11n CAP w/CleanAir

Cisco AIR-CAP2602E-E-K9

E (E regulatory domain - ETSI):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz, 8 channels
(excludes 5.600 to 5.640 GHz)

Dual-band controller-based 802.11a/g/n

Specifications:

Интерфейс: 1x10/100/1000Base-T

Антена: External Antenna: Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

Сигурност: 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA; 802.1X; Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)

Захранване: Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz; PoE 802.3af; Cisco AP2600 Power Injectors (AIR-PWRINJ4=); Cisco AP2600 Local Power Supply (AIR-PWR-B=)

Стандарти: 802.11a, 802.11b, 802.11g, 802.11n, 802.3af, 802.11h, 802.11d, 802.11i, 802.1x

Скорост: 450 Mbps

Управление: 1 x management - console - RJ-45

Software
Cisco Unified Wireless Network Software Release 7.2.110 or later.
Supported Wireless LAN Controllers
● Cisco 2500 Series, Cisco Wireless LAN Controller Module (WLCM) on Cisco Services Ready Engine (SRE) for Integrated Services Router Generation 2 (ISR G2), Cisco Wireless Services Module 2 (WiSM2), Cisco 5500 Series, Cisco Flex 7500 Series
802.11n Version 2.0 (and Related) Capabilities
● 3x4 multiple-input multiple-output (MIMO) with three spatial streams
● Maximal ratio combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40-MHz with 5 GHz)
● Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit (A-MSDU) (Tx/Rx)
● 802.11 dynamic frequency selection (DFS)
● Cyclic shift diversity (CSD) support
Data Rates Supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz[1] and 5 GHz):

Maximum Number of Nonoverlapping Channels
2.4 GHz
● 802.11b/g:
◦ 20 MHz: 3
● 802.11n:
◦ 20 MHz: 3
5 GHz
● 802.11a:
◦ 20 MHz: 21
● 802.11n:
◦ 20 MHz: 21
◦ 40 MHz: 9
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

Receive Sensitivity
● 802.11b (CCK)
◦ -100 dBm @ 1 Mb/s
◦ -99 dBm @ 2 Mb/s
◦ -92 dBm @ 5.5 Mb/s
◦ -88 dBm @ 11 Mb/s
● 802.11g (non HT20)
◦ -91 dBm @ 6 Mb/s
◦ -91 dBm @ 9 Mb/s
◦ -91 dBm @ 12 Mb/s
◦ -90 dBm @ 18 Mb/s
◦ -87 dBm @ 24 Mb/s
◦ -85 dBm @ 36 Mb/s
◦ -80 dBm @ 48 Mb/s
◦ -78 dBm @ 54 Mb/s
● 802.11a (non HT20)
◦ -92 dBm @ 6 Mb/s
◦ -92 dBm @ 9 Mb/s
◦ -92 dBm @ 12 Mb/s
◦ -92 dBm @ 18 Mb/s
◦ -89 dBm @ 24 Mb/s
◦ -86 dBm @ 36 Mb/s
◦ -81 dBm @ 48 Mb/s
◦ -79 dBm @ 54 Mb/s

External Antenna (Sold Separately)
● Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry's broadest selection of802.11n antennas delivering optimal coverage for a variety of deployment scenarios

Interfaces
● 10/100/1000BASE-T autosensing (RJ-45)
● Management console port (RJ-45)

Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions
(W x L x H)
● Access point (without mounting bracket): 8.69x8.69x2.11in. (22.1x22.1x5.4)
Weight
● 2.3 lbs (1.04 kg) (2.7 lbs for external)

Environmental
Cisco Aironet 2600i
● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
● Nonoperating (storage) Altitude Test 25˚C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating Altitude Test: 40˚C, 9843 ft.
Cisco Aironet 2600e
● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
● Nonoperating (storage) Altitude Test: 25˚C, 15,000 ft.
● Operating temperature: -4 to 131°F (-20 to 55°C)
● Operating humidity: 10 to 90 % (noncondensing)
● Operating Altitude Test: 40˚C, 9843 ft.

System Memory
● 256 MB DRAM
● 32 MB flash

Input Power Requirements
● AP2600: 44 to 57 VDC
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz

Powering Options
● 802.3af Ethernet Switch
● Cisco AP2600 Power Injectors (AIR-PWRINJ4=)
● Cisco AP2600 Local Power Supply (AIR-PWR-B=)

Power Draw
● AP2600: 12.95W
Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount depending on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-2600-series/data_sheet_c78-709514.html




Виж още Аксеспойнт/Репитер Безжични Cisco
Виж всички Аксеспойнт/Репитер Безжични в категорията