Усилвател Pro-Ject Audio Systems Stereo Box DS2, 2x80W@8ohms, съвместим с грамофон и MM/MC дози, вграден предусилвател, 3x RCA-in, 1x RCA/phono-in, RCA-out, 6.3mm Jack за слушалки, Bluetooth, сребрист

Pro-Ject Audio Systems Stereo Box DS2

Stereo Box DS2 is Pro-Ject’s take on the classic stereo integrated with phono accommodation. The focus is outstanding, unimpeded sound quality with a simple, non-congested feature set. The preamp section houses a high-quality MM/MC-compatible phonostage. Three RCA line inputs make way for CD players, DACs, streaming devices, etc. For you convenience, we’ve also added a Bluetooth receiver for easy wireless playback from your phone or tablet. However, the real star of this show is the power amp section. Dual-mono designed and able to drive most speakers on the market, music will come alive with powerful transients and a rich, wide soundstage with mesmerizing dynamics.

Variable and fixed RCA outputs allow you to connect active speakers or a subwoofer. The 1/4″ headphone output on the front panel is driven by its own dedicated amplifier stage and has ample headroom to drive even demanding headphones. No corners were cut when designing the electrical circuitry and in this way, the relatively small and compact Stereo Box DS2 can compete with much bigger (and pricier) integrateds.

• Dual mono design principle
• Built-in phono pre-amplifier with MM & MC capability
• Other inputs: 3x analogue, 1x Bluetooth
• 4th generation Bluetooth with aptX capability & antenna
• Volume control with motor driven potentiometer
• Headphone output with dedicated amplifier stage
• Fixed & variable outputs for subwoofer or second zone amp
• Trigger In and Output
• IR remote & built-in App Remote Control via Bluetooth
• Free Box Control App controls this device & other IR equipment

Specs

• Output power: 2x 80 W / 135W at 8 / 4 ohms
• Noise floor: >-85dB
• Channel separation: > 65dB (@ 10kHz)
• THD+N: < 0,03%@ 3W
• Frequency response: 20Hz – 25kHz (max. deviation -0,1dB +0,2dB)
• Analog inputs: 3 pair RCA/Cinch sockets, line 1 pair phono MM/MC input (RCA)
• Input impedance Line: 50kOhms,
• Phono: MM 47kOhms / MC 100 Ohms
• Digital inputs: Bluetooth (aptX)
• Speaker connectors: 4mm Ø banana plugs, spades connectors or naked wire
• Headphone output: 6,3mm jack
• Headphone impedance: 16 – 600Ohms recommended
• Analogue outputs: RCA fixed, RCA variable, power amp, 6,3mm headphones (front)
• Power supply: 36V/5,5A DC; 100 – 240V, 50/60Hz
• Standby-power consumption: < 1 Watt