UPS APC Smart-UPS SMT3000RMI2U, 3000VA/2700W, 2U, Line Interactive, Rack

APC Smart-UPS 3000VA LCD RM 2U 230V
SMT3000RMI2U_WBEXTWAR3YR-SP-04

SMT3000RMI2UFeatures

APC Smart-UPS 3000VA LCD RM 2U 230V

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable
Provides temporary battery power when the utility power is out.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utlility costs, generates less heat.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Network manageable
Provides remote power management of the UPS over the network.
Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
Serial connectivity
Provides management of the UPS via a serial port.
Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Wide input voltage range
Designed for harsh electrical environments to save battery life.

Output

Output power capacity
2.7 KWatts / 3.0 kVA

Max Configurable Power (Watts)
2.7 KWatts / 3.0 kVA

Nominal Output Voltage
230V

Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage

Output Frequency (sync to mains)
47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal

Other Output Voltages
220, 240

Topology
Line Interactive

Waveform type
Sine wave

Output Connections
(3) IEC Jumpers (Battery Backup)
(1) IEC 320 C19 (Battery Backup)
(8) IEC 320 C13 (Battery Backup)

Transfer Time
4ms typical : 8ms maximum

Input

Nominal Input Voltage
230V

Input frequency
50/60 Hz +/- 3 Hz (auto sensing)

Input Connections
British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P

Cord Length
2meters

Input voltage range for main operations
160 - 286V

Input voltage adjustable range for mains operation
151 - 302V

Number of Power Cords
1

Other Input Voltages
220, 240

Batteries & Runtime

Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time
3hour(s)

Replacement Battery
RBC43

Expected Battery Life (years)
3 - 5

RBC Quantity
1

Runtime
View Runtime Graph
View Runtime Chart

Efficiency
View Efficiency Graph

Communications & Management

Interface Port(s)
USB
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console

Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays

Available SmartSlot™ Interface Quantity
1

Surge Protection and Filtering

Surge energy rating
320Joules

Physical

Maximum Height
86mm , 8.6cm

Maximum Width
480mm , 48.0cm

Maximum Depth
683mm , 68.3cm

Rack Height
2U

Net Weight
44.28kg

Shipping weight
51.7kg

Shipping Height
254mm , 25.4cm

Shipping Width
600mm , 60.0cm

Shipping Depth
980mm , 98.0cm

Units per Pallet
8.0

Environmental

Operating Environment
0 - 40 °C

Operating Relative Humidity
0 - 95 %

Operating Elevation
0-3000meters

Storage Temperature
-15 - 45 °C

Storage Relative Humidity
0 - 95 %

Storage Elevation
0-15000meters

Audible noise at 1 meter from surface of unit
55.0dBA

Online thermal dissipation
348.0BTU/hr

Conformance

Approvals
CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR V1.0 (EU), GS Mark, IRAM, RCM, VDE, WEEE

Sustainable Offer Status

RoHS
Compliant
REACH
REACH: Contains No SVHCs
PEP
Available in Documentation tab
EOLI
Available in Documentation tab



Виж още UPS APC
Виж всички UPS в категорията